Rail-Lite™ Continuous run Bezel Trim

Housing: Steel and aluminum, black finish internal and external.

Sliding: Individual heads can slide a maximum of 2’/610mm left or right of its centre point.

Angling: 0° to 45° in 5° intervals.

Rotating: 360° limit.

Bezel trim version: Extruded aluminum. For installation into ceilings with a thickness range of 1/2" to 3/4" (12mm-19mm).

LED Heat sink: Extruded aluminum.

Reflectors: Narrow, medium and wide beam, highly reflective, specular finish, vacuum plated. Twist’N’Lock reflectors for on-site switching.

Electrical: Integral junction box for branch circuit through wiring.

LEDs: High power, LEDs can be replaced from below.

Drivers: Constant Current driver for 120-277V (EU-240V). Drivers can be replaced from below.

PoE: Rail-Lite can integrate into your data network via Power over Ethernet (PoE) connectivity.

L70 @25^oC (77^oF): > 60,000 hrs.

Delivered Lumens: Delivered lumens & LPW based on 3000K (min 80 CRI).

Approvals: Damp Location (Indoor use only).

Notes: 

Continuous runs connect mechanically but do not connect electrically. Each module requires a power supply. Power can be daisy chained from one module to another. LED heads slide as far as the inside corner of corner, T-Junction and X-Junction accessories.

Photometric testing performed using LM79 procedures.
For all other reflectors types please consult photometric files.
Due to constant change in LEDs, please check our website for current product specifications.

Links:

http://www.bridgelux.com/products/v-series#specifications
http://www.xicato.com/xtm-led-module/overview 

Rail-Lite™ | Patent Pending (United States, Canada and European Patent Convention)