Xacara CT™ Recessed

XACARA CT is a T-bar-ready system offering pre-installed spots in a 2’ x 2’ cold steel panel. This design integrates a trimless aesthetic into the grid system, for a seamless look. The spotlight apertures are available in rounded or sharp corners. Optimize light levels and color saturation according to the application by choosing up to 4 spotlights in a single unit, with either medium or wide beam angles, 2 LED powers, and CRI of 80 or 90.

DOWNLOAD SPEC SHEET

Tech Specs

Housing

Steel. For new construction. Non I.C. rated housing (NA only). Not suitable for insulated ceilings.

Array housings

Die cast aluminium.

Gimbal

Fully articulating on two axes.

Protective lens

Clear glass. 26W fixtures only.

Mounting

Lays into 2 x 2 T-bar ceiling. Multiple suspension points provided, suspension hardware by others.

Finish

Main panel satin white powder coated. Other components as specified.

Electrical

Through branch wiring. J box and driver housing easily accessible.

Reflectors

Highly reflective, specular finish, vacuum plated.

Integral Emergency system (NA only) 

Emergency option provides a 1.5 hour emergency lighting facility. The self contained system includes the inverter module, NiCad batteries, LED charge indicator and test switch.

Drivers

HPF electronic for 120-277V (EU-240V). 0-10V dimming (10%). The driver is integral to the fixture housing.

Delivered Lumens 

Delivered lumens & LPW based on 3000K (min 80 CRI).

Sensors

Consult factory regarding sensor compatibility.

Reported L70 @25°C (77°F)

> 60,000 hrs.

Approvals 

Damp Rated.

Note 

Photometric testing performed using LM 79 procedures

Approvals

  • ETL
  • CE
  • Grounding
  • Damp Location (Indoor Use)
  • IP 20

Mounting & Optics

Icon for Recessed Recessed
Icon for 26W-36° 26W-36°
Icon for 26W-70° 26W-70°
Icon for 38W-28° 38W-28°
Icon for 38W-47° 38W-47°
Icon for Declare Declare

Product Configurator